Performance of Electric Arc Furnace Slag as a Partial Cement Replacement in Concrete: A Bolomey Model Investigation

Abdelgader, H. S., Baden, A. S., & Belker, M. S. (2010). USING THE THREE EQUATION METHOD FOR CONCRETE MIX DESIGN. Journal of Engineering Research (Libya), 14, 69–78. https://doi.org/10.66411/jer.v14i.219

Abdelgader, H., Suleiman, R., Adam, A., Khatib, J., Abdelgader, H., Suleiman, R., Adam, A., & Khatib, J. (2020). CONCRETE MIX DESIGN USING SIMPLE EQUATIONS. BAU Journal - Science and Technology, 2(1), 2. https://doi.org/10.54729/2706-784X.1043

Abdelgader, Hakim. S., & El-Baden, Ali. S. (2012). Three Equations Method for Mix Design. Concrete Plant International. https://www.scribd.com/document/348250375/Bolomeya-Model-for-Normal-Concrete-Mix-Design

Abdelgader, S., Kurpinska, M., Abdelgader, H., Khatib, J., Abdelgader, S., Kurpinska, M., Abdelgader, H., & Khatib, J. (2022). CONCRETE MIX DESIGN USING ABRAMS AND BOLOMEY METHODS. BAU Journal - Science and Technology, 4(1), 3. https://doi.org/10.54729/MJPS9917

Amin, M., Khan, K., Saleem, M., Khurram, N., & Niazi, M. (2017). Influence of Mechanically Activated Electric Arc Furnace Slag on Compressive Strength of Mortars Incorporating Curing Moisture and Temperature Effects. Sustainability, 9(8), 1178. https://doi.org/10.3390/su9081178

ASTM C136-06. (2025). Test Method for Sieve Analysis of Fine and Coarse Aggregates. https://doi.org/10.1520/C0136_C0136M-25

Bolomey, J. (1935). Granulation et prévision de la résistance probable des bétons. Travaux, 19(30), 228–232. https://www.scirp.org/reference/referencespapers?referenceid=3020659

BS 812-103. (1992). Testing aggregates – Method for Determination of Particle Size Distribution.

BS EN 12390-3. (2011). Testing hardened concrete. Part 3, Compressive strength of test specimens. British Standards Institution.

C192/C192M-26. (2026). Practice for Making and Curing Concrete Test Specimens in the Laboratory. https://doi.org/10.1520/C0192_C0192M-26

Cement. Part 1, Composition, specifications and conformity criteria for common cements. (2019). British Standards Institution.

Cement technology roadmap 2009 : carbon emissions reductions up to 2050. (2009). OECD/IEA ; World Business Council for Sustainable Development.

Dixon, D. E., Prestrera, J. R., George U Burg, S. R., Abdun-Nur, E. A., Barton Leonard W Bell, S. G., Blas, S. J., Ramon Carrasquillo Peggy M Carrasquillo Alan C Carter Martyn T Conrey James E Cook Russel A Cook, J. L., Cordon Wayne J Costa Edward A Abdun-Nurt William L Barringer-t Stanley G Barton Leonard W Bell, W. A., Bennett, J. E., Floyd Best Ramon L Carrasquillo James E Cook-t Russell A Cook David A Crocker Kenneth W Day Calvin L Dodl Thomas A Fox Donald A Graham George W Hollon William W Hotaling, J. J., Robert Jenkins Paul Klieger Frank J Lahm Stanley H Lee Gary R Mass, J. S., Mearing Richard C Meininger, M. A., Narva Leo P Nicholson James E Oliverson James S Pierce Sandor Popovics, R. W., Ragan Harry C Robinson Jere H Rose, S. A., Scherocman James M Shilstone, J. A., Crocker Luis H Diaz Donald E Dixont Calvin L Dodl Thomas A Fox George W Hollon Tarif M Jaber Stephen M Lane Stanley H Lee Richard C Meiningert James E Oliverson James S Pierce Sandor Popovics Steven A Ragan Jere H Roget Donald L Schlegel James M Shilstone, D. A., Paul Stodola William S Sypher Ava Sxypula Jimmie L, S. R., Stanley Virgalitte Woodward L Vogt Jack W Weber Dean J White, T. J., & Marshall Williams John R Wilson, I. S. (1991). Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete (ACI 211.1-91) Chairman, Subcommittee A.

Gartner, E. (2004). Industrially interesting approaches to “low-CO2” cements. Cement and Concrete Research, 34(9), 1489–1498. https://doi.org/10.1016/j.cemconres.2004.01.021

Humphreys, K., & Mahasenan, M. (2002). Towards a sustainable cement industry. Substudy 8: climate change.

Ionescu, D. V. (1999). The hydraulic potential of high iron bearing steel slags. University of British Columbia.

MAHASENAN, N., SMITH, S., & HUMPHREYS, K. (2003). The Cement Industry and Global Climate Change: Current and Potential Future Cement Industry CO2 Emissions. Greenhouse Gas Control Technologies - 6th International Conference, 995–1000. https://doi.org/10.1016/B978-008044276-1/50157-4

Manso, J. M., Gonzalez, J. J., & Polanco, J. A. (2004). Electric Arc Furnace Slag in Concrete. Journal of Materials in Civil Engineering, 16(6), 639–645. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:6(639)

Muhmood, L., Vitta, S., & Venkateswaran, D. (2009). Cementitious and pozzolanic behavior of electric arc furnace steel slags. Cement and Concrete Research, 39(2), 102–109. https://doi.org/10.1016/j.cemconres.2008.11.002

Neville, A. M. . (1995). Properties of concrete - standards updated to 2002. Prentice Hall/Pearson Education.

Neville, A. M. . (2012). Properties of concrete. Pearson.

Review of 11th Global Slag Conference 2016. (n.d.). Retrieved https://www.globalslag.com/conferences/global-slag/review/global-slag-review-2016

Rojas, M. F., & Sánchez De Rojas, M. I. (2004). Chemical assessment of the electric arc furnace slag as construction material: Expansive compounds. Cement and Concrete Research, 34(10), 1881–1888. https://doi.org/10.1016/J.CEMCONRES.2004.01.029

Roslan, N. H., Ismail, M., Khalid, N. H. A., & Muhammad, B. (2020). Properties of concrete containing electric arc furnace steel slag and steel sludge. Journal of Building Engineering, 28, 101060. https://doi.org/10.1016/J.JOBE.2019.101060

Shi, C. (2004). Steel Slag—Its Production, Processing, Characteristics, and Cementitious Properties. Journal of Materials in Civil Engineering, 16(3), 230–236. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:3(230)

U.S. Geological Survey. (2015). Mineral commodity summaries 2015. https://doi.org/10.3133/70140094

World Business Council for Sustainable Development The Cement Sustainability Initiative Recycling Concrete. (n.d.).

Yang, K. H., Jung, Y. B., Cho, M. S., & Tae, S. H. (2015). Effect of supplementary cementitious materials on reduction of CO2 emissions from concrete. Journal of Cleaner Production, 103, 774–783. https://doi.org/10.1016/J.JCLEPRO.2014.03.018