Impact of CFRP Strengthening on the Performance of RC Columns Under Static and Dynamic Loading

Alizamir, M., Gholampour, A., Kim, S., Keshtegar, B., & Jung, W. (2024). Designing a reliable machine learning system for accurately estimating the ultimate condition of FRP-confined concrete. Scientific Reports, 14(1), 20466. https://doi.org/10.1038/s41598-024-69990-4

American Concrete Institute. (2002). ACI Committee 440 (2002) Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, ACI 440.2R-02.

Balázs, G., Barros, J., Bilotta, A., Bournas, D., Ceroni, F., Czaderski, C., D’Antino, T., Kolyvas, C., Kotynia, R., Niedermeier, R., Nigro, E., Oller, E., Pantazopoulou, S., Pecce, M., Prota, A., Sena-Cruz, J., Tastani, S., Thermou, G., & Zilch, K. (2019). fib Bulletin 90. Externally applied FRP reinforcement for concrete structures (S. Matthys & T. Triantafillou, Eds.). fib. The International Federation for Structural Concrete. https://doi.org/10.35789/fib.BULL.0090

Carey, S. A., & Harries, K. A. (2005). Axial Behavior and Modeling of Confined Small-, Medium-, and Large-Scale Circular Sections with Carbon Fiber-Reinforced Polymer Jackets. Structural Journal, 102(4), 596–604. https://doi.org/10.14359/14564

Celik, O. C., & Ellingwood, B. R. (2009). Seismic Risk Assessment of Gravity Load Designed Reinforced Concrete Frames Subjected to Mid-America Ground Motions. Journal of Structural Engineering, 135(4), 414–424. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(414)

Colomb, F., Tobbi, H., Ferrier, E., & Hamelin, P. (2008). Seismic retrofit of reinforced concrete short columns by CFRP materials. Composite Structures, 82(4), 475–487. https://doi.org/10.1016/j.compstruct.2007.01.028

Concrete Society. (2004). TR55 Design Guidance For Strengthening Concrete Structures Using FRP. https://www.scribd.com/document/357010253/TR55-Design-Guidance-For-Strengthening-Concrete-Structures-Using-FRP-pdf

De Lorenzis, L., & Tepfers, R. (2003). Comparative Study of Models on Confinement of Concrete Cylinders with Fiber-Reinforced Polymer Composites. Journal of Composites for Construction, 7(3), 219–237. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:3(219)

Eurocode 8: Design of structures for earthquake resistance | Eurocodes: Building the future. (n.d.). Retrieved https://eurocodes.jrc.ec.europa.eu/EN-Eurocodes/eurocode-8-design-structures-earthquake-resistance

Fabbrocino, G., Verderame, G. M., & Manfredi, G. (2005). Rotation capacity of old type RC columns. Proceedings of the Fib Symposium “Keep Concrete Attractive,” 891–896.

Faella, C., Napoli, A., Realfonzo, R., & Rizzano, G. (2006). Seismic Behaviour of Square R/C Columns Confined with FRP. First European Conference on Earthquake Engineering and Seismology, 8512–8521.

Feldman, L. R., & Bartlett, F. M. (2007). Bond Stresses Along Plain Steel Reinforcing Bars in Pullout Specimens. ACI Structural Journal, 104(6), 685–692. https://doi.org/10.14359/18950

Guadagnuolo, M., Donadio, A., Tafuro, A., & Faella, G. (2020). Experimental Behavior of Concrete Columns Confined by Transverse Reinforcement with Different Details. The Open Construction & Building Technology Journal, 14(1), 250–265. https://doi.org/10.2174/1874836802014010250

Huang, J., Gao, P., Chen, D., Ma, C., & Zhang, N. (2024). Effect of concrete strength on the seismic performance of circular reinforced concrete columns confined by basalt and carbon fiber-reinforced polymer. Construction and Building Materials, 449, 138373. https://doi.org/10.1016/j.conbuildmat.2024.138373

Işık, E., Avcil, F., Hadzima-Nyarko, M., İzol, R., Büyüksaraç, A., Arkan, E., Radu, D., & Özcan, Z. (2024). Seismic Performance and Failure Mechanisms of Reinforced Concrete Structures Subject to the Earthquakes in Türkiye. Sustainability, 16(15), 6473. https://doi.org/10.3390/su16156473

Lam, L., & Teng, J. G. (2003). Design-Oriented Stress-Strain Model for FRP-Confined Concrete in Rectangular Columns. Journal of Reinforced Plastics and Composites, 22(13), 1149–1186. https://doi.org/10.1177/0731684403035429

Lin, S., Zhao, Y.-G., Li, J., & Lu, Z.-H. (2021). Confining Stress Path-Based Compressive Strength Model of Axially Loaded FRP-Confined Columns. Journal of Composites for Construction, 25(1). https://doi.org/10.1061/(ASCE)CC.1943-5614.0001090

Mangalathu, S., & Jeon, J.-S. (2019). Machine Learning–Based Failure Mode Recognition of Circular Reinforced Concrete Bridge Columns: Comparative Study. Journal of Structural Engineering, 145(10). https://doi.org/10.1061/(ASCE)ST.1943-541X.0002402

Mohamad, B., & Alamoudi, S. (2021). Section Design of Reinforced Concrete Columns Confined by CFRP. Association of Arab Universities Journal of Engineering Sciences, 28(4), 43–56. https://doi.org/10.33261/JAARU.2021.28.4.005

Paolacci, F., & Giannini, R. (2012). An experimental and numerical investigation on the cyclic response of a portal frame pier belonging to an old reinforced concrete viaduct. Earthquake Engineering & Structural Dynamics, 41(6), 1109–1127. https://doi.org/10.1002/eqe.1175

Parvin, A., & Brighton, D. (2014). FRP Composites Strengthening of Concrete Columns under Various Loading Conditions. Polymers, 6(4), 1040–1056. https://doi.org/10.3390/polym6041040

Priestley, M. J. N., Seible, F., & Calvi, G. M. (1996). Seismic Design and Retrofit of Bridges. Wiley. https://doi.org/10.1002/9780470172858

Rochette, P., & Labossière, P. (2000). Axial Testing of Rectangular Column Models Confined with Composites. Journal of Composites for Construction, 4(3), 129–136. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:3(129)

Sabbahfar, P., Melo, J., Costa, A., Varum, H., & Rodrigues, H. (2025). Cyclic Behavior of Seismically Non-Conforming Interior Reinforced Concrete Beam–Column Joints. Buildings, 15(2), 202. https://doi.org/10.3390/buildings15020202

Tinawi, R. (1983). Une présentation de la méthode des éléments finis. Canadian Journal of Civil Engineering, 10(1), 176–178. https://doi.org/10.1139/l83-028

Verderame, G. M., Ricci, P., Carlo, G. De, & Manfredi, G. (2009). Cyclic bond behaviour of plain bars. Part I: Experimental investigation. Construction and Building Materials, 23(12), 3499–3511. https://doi.org/10.1016/j.conbuildmat.2009.07.002

Wang, L.-M., & Wu, Y.-F. (2008). Effect of corner radius on the performance of CFRP-confined square concrete columns: Test. Engineering Structures, 30(2), 493–505. https://doi.org/10.1016/j.engstruct.2007.04.016

Wang, Z.-H., Li, L., Zhang, Y.-X., & Zheng, S.-S. (2019). Reinforcement model considering slip effect. Engineering Structures, 198, 109493. https://doi.org/10.1016/j.engstruct.2019.109493

Wei, Y., Xu, Y., Wang, G., Cheng, X., & Li, G. (2022). Influence of the Cross-Sectional Shape and Corner Radius on the Compressive Behaviour of Concrete Columns Confined by FRP and Stirrups. Polymers, 14(2), 341. https://doi.org/10.3390/polym14020341

Wu, G., Lü, Z. T., & Wu, Z. S. (2006). Strength and ductility of concrete cylinders confined with FRP composites. Construction and Building Materials, 20(3), 134–148. https://doi.org/10.1016/j.conbuildmat.2005.01.022

Youssef, M. N., Feng, M. Q., & Mosallam, A. S. (2007). Stress–strain model for concrete confined by FRP composites. Composites Part B: Engineering, 38(5–6), 614–628. https://doi.org/10.1016/j.compositesb.2006.07.020

Yurdakul, Ö., Artagan, S. S., Balaban, E., & Routil, L. (2022). Evaluation of cyclic bond-slip behavior of smooth bars in low strength concrete: An experimental and stochastic study. Structures, 41, 568–585. https://doi.org/10.1016/j.istruc.2022.05.036

Zhao, J., & Sritharan, S. (2007). Modeling of Strain Penetration Effects in Fiber-Based Analysis of Reinforced Concrete StructuresConcrete Structures. ACI Structural Journal, 104(2), 133–141. https://doi.org/10.14359/18525