Interface‑Controlled Shear Behavior of Masonry: Insights from a Database of Triplet Tests
- Authors
-
-
- Keywords:
- Masonry Shear Behavior, Triplet Shear Test, Mortar–Brick Interface, Cohesion and Friction, Data‑Driven Analysis
- Abstract
-
The shear behavior of masonry bed joints governs the structural response of masonry assemblies under lateral loading yet remains difficult to predict due to material heterogeneity and interface-controlled mechanisms. Despite the prevalence of triplet shear tests in characterizing joint behavior, existing models frequently employ oversimplified assumptions, most notably a single linear Mohr–Coulomb failure envelope calibrated from limited parameters. This study addresses these limitations through a comprehensive, data-driven analysis of masonry shear behavior based on a harmonized literature database. A total of 183 masonry triplet shear tests were collected from published studies. The dataset under consideration is extensive, encompassing a broad array of masonry units, mortar types, mixture proportions, and interface conditions. A series of statistical correlation analyses were conducted to ascertain the relationships between brick-and-mortar compressive strengths, mortar composition, and the shear parameters of cohesion and friction. The analysis was restricted to monotonic loading conditions. The findings indicate that compressive strength parameters demonstrate a weak or negligible correlation with shear properties. Conversely, the composition of mortar, particularly the proportion of sand to binder, exerts a predominant influence on friction control. Furthermore, the findings indicated that cohesion and friction exhibited significant independence, thereby underscoring the multifaceted mechanisms underlying masonry shear resistance. The regression and nearest neighbor predictive approaches were validated against independent experimental datasets covering weak to strong masonry systems, successfully reproducing observed trends and behavioral hierarchies. The findings indicate that the Mohr–Coulomb envelope model does not adequately capture the behavior of masonry shear. This highlights the necessity for data-driven modeling strategies that are tailored to specific interfaces..
- References
-
Abdou, L., Saada, R. A., Meftah, F., & Mebarki, A. (2006). Experimental investigations of the joint-mortar behaviour. Mechanics Research Communications, 33(3), 370–384. https://doi.org/10.1016/j.mechrescom.2005.02.026 DOI: https://doi.org/10.1016/j.mechrescom.2005.02.026
Andreotti, G., Graziotti, F., & Magenes, G. (2018). Detailed micro-modelling of the direct shear tests of brick masonry specimens: The role of dilatancy. Engineering Structures, 168, 929–949. https://doi.org/10.1016/j.engstruct.2018.05.019 DOI: https://doi.org/10.1016/j.engstruct.2018.05.019
Barattucci, S., Sarhosis, V., Bruno, A. W., D’Altri, A. M., de Miranda, S., & Castellazzi, G. (2020). An experimental and numerical study on masonry triplets subjected to monotonic and cyclic shear loadings. Construction and Building Materials, 254, 119313. https://doi.org/10.1016/j.conbuildmat.2020.119313 DOI: https://doi.org/10.1016/j.conbuildmat.2020.119313
Bompa, D. V., & Elghazouli, A. Y. (2020). Experimental and numerical assessment of the shear behaviour of lime mortar clay brick masonry triplets. Construction and Building Materials, 262, 120571. https://doi.org/10.1016/j.conbuildmat.2020.120571 DOI: https://doi.org/10.1016/j.conbuildmat.2020.120571
Collin, L., Gatuingt, F., Giry, C., & Hild, F. (2025). Exploring the shear behavior of masonry triplets via digital image correlation, damage quantification and Mohr-Coulomb criterion identification. Structures, 80, 109696. https://doi.org/10.1016/j.istruc.2025.109696 DOI: https://doi.org/10.1016/j.istruc.2025.109696
Collin, L., Gatuingt, F., Giry, C., & Hild, F. (2026). Identification of non linear parameters from masonry triplet shear tests using digital image correlation. Materials and Structures, 59(4), 193. https://doi.org/10.1617/s11527-026-03052-1 DOI: https://doi.org/10.1617/s11527-026-03052-1
Dhir, P. K., Tubaldi, E., Orfeo, A., & Ahmadi, H. (2022). Cyclic shear behaviour of masonry triplets with rubber joints. Construction and Building Materials, 351, 128356. https://doi.org/10.1016/j.conbuildmat.2022.128356 DOI: https://doi.org/10.1016/j.conbuildmat.2022.128356
Lavado, L., & Gallardo, J. (2019). Shear strength of brick mortar interface for masonry in Lima city. TECNIA, 29(2). https://doi.org/10.21754/tecnia.v29i2.707 DOI: https://doi.org/10.21754/tecnia.v29i2.707
Magagnini, E., Nicoletti, V., & Gara, F. (2025). Experimental and Numerical Investigation of Historic Brickwork Masonry with Weak and Degraded Joints: Failure Mechanisms Under Compression and Shear. Buildings, 15(21), 3993. https://doi.org/10.3390/buildings15213993 DOI: https://doi.org/10.3390/buildings15213993
Milani, G., Simoni, M., & Tralli, A. (2014). Advanced numerical models for the analysis of masonry cross vaults: A case-study in Italy. Engineering Structures, 76, 339–358. https://doi.org/10.1016/j.engstruct.2014.07.018 DOI: https://doi.org/10.1016/j.engstruct.2014.07.018
Monteferrante, C., Ferretti, F., & Savoia, M. (2025). Large-scale seismic vulnerability assessment of masonry buildings through a simplified methodology. Bulletin of Earthquake Engineering. https://doi.org/10.1007/s10518-025-02319-2 DOI: https://doi.org/10.1007/s10518-025-02319-2
NF EN 1052-3. (2003). Methods of test for masonry - Part 3 : determination of initial shear strength.
Pavan, G. S., & Nanjunda Rao, K. S. (2016). Behavior of Brick–Mortar Interfaces in FRP-Strengthened Masonry Assemblages under Normal Loading and Shear Loading. Journal of Materials in Civil Engineering, 28(2). https://doi.org/10.1061/(ASCE)MT.1943-5533.0001388 DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001388
Pelà, L., Kasioumi, K., & Roca, P. (2017). Experimental evaluation of the shear strength of aerial lime mortar brickwork by standard tests on triplets and non-standard tests on core samples. Engineering Structures, 136, 441–453. https://doi.org/10.1016/j.engstruct.2017.01.028 DOI: https://doi.org/10.1016/j.engstruct.2017.01.028
Prakash, S. S., & Alagusundaramoorthy, P. (2008). Load resistance of masonry wallettes and shear triplets retrofitted with GFRP composites. Cement and Concrete Composites, 30(8), 745–761. https://doi.org/10.1016/j.cemconcomp.2007.11.005 DOI: https://doi.org/10.1016/j.cemconcomp.2007.11.005
Rob van der Pluijm. (1999). Out-of-plane bending of masonry behaviour and strength. Technische Universiteit Eindhoven.
Shabdin, M., Zargaran, M., & Attari, N. K. A. (2018). Experimental diagonal tension (shear) test of Un-Reinforced Masonry (URM) walls strengthened with textile reinforced mortar (TRM). Construction and Building Materials, 164, 704–715. https://doi.org/10.1016/j.conbuildmat.2017.12.234 DOI: https://doi.org/10.1016/j.conbuildmat.2017.12.234
Thomas Zimmermann, & Alfred Strauss. (2011). Variation of shear strength of masonry with different mortar properties. The North American Masonry Conference (NAMC), 1–14.
Turath Gharib. (2015). Strengthening of Historical Masonry Structures with Composite Materials: Application to Limestone Walls [Ph.D thesis]. Université Claude Bernard Lyon 1 (University of Lyon 1), France.
Zimmermann, T., Strauss, A., & Bergmeister, K. (2012). Structural behavior of low- and normal-strength interface mortar of masonry. Materials and Structures, 45(6), 829–839. https://doi.org/10.1617/s11527-011-9801-2 DOI: https://doi.org/10.1617/s11527-011-9801-2
- Cover Image
-
- Downloads
- Additional Files
- Published
- 2026-05-22
- Data Availability Statement
-
The data that support the findings of this study are available from the corresponding author upon reasonable request.
- Section
- Review Article
- Categories
- License
-
Copyright (c) 2026 YOUSRA OULED ABDELKADER, George Wardeh, Hanaa FARES, Firas AL-MAHMOUD
This work is licensed under a Creative Commons Attribution 4.0 International License.
Open Access Licences
User rights
All articles published open access will be immediately and permanently free for everyone to read and download, copy and distribute.
How to Cite
Similar Articles
- Nour ALhuda ALkhalil, Mohammad Bassam Kanjo, An Analytical Study of Hybrid Reinforced Concrete Columns on Combined Bending , Steps For Civil, Constructions and Environmental Engineering: Vol. 3 No. 1 (2025): January - March
- Bassel Alhassan, Batoul Alsaadi, Alaa Barazi, Alzharaa Merza, Amal Esmail, An Integrated Framework for the Rehabilitation of War-Damaged Public Buildings using BIM, AI, VR, and AR Technologies , Steps For Civil, Constructions and Environmental Engineering: Vol. 3 No. 3 (2025): July - September
- Ammar Kheder Ismaiel, Mohammad Maarouf, A Simple and Sensitive Spectrophotometric Method for the Determination of Copper(II) in Aqueous Solutions Using a Novel Schiff Base Reagent , Steps For Civil, Constructions and Environmental Engineering: Vol. 2 No. 4 (2024): October - December
- Alaa Sukkari, Ghazi Al-Khateeb, Mohammed Wajeeh, Helal Ezzat, Waleed Zeiada, Impact of Sasobit on Asphalt Binder’s Performance under UAE Local Conditions , Steps For Civil, Constructions and Environmental Engineering: Vol. 2 No. 3 (2024): July - September
- Glykeria Porfyriadou, Dimitrios Moschovas, Dimitrios Exarchos, Konstantinos Kolovos, Theodoros Matikas, Nikolaos E. Zafeiropoulos, Polypropylene Fibers for 3D Brace-Reinforced Concrete , Steps For Civil, Constructions and Environmental Engineering: Vol. 3 No. 1 (2025): January - March
- Jamal Khatib, Lelian W ElKhatib, Hassan Ghanem, Adel Elkordi, Recent Trends in Construction Materials Using Bio-Ash , Steps For Civil, Constructions and Environmental Engineering: Vol. 3 No. 2 (2025): April - June
- Nasser Tarraf Ibrahem, Hyperspectral Images Technique in Mapping and Quantifying Gypsum Case Study: Jayroud District , Steps For Civil, Constructions and Environmental Engineering: Vol. 2 No. 1 (2024): January – March
You may also start an advanced similarity search for this article.